TecJet Tools
9927-1061_AC.exe
The TecJet Service Tool is used to configure, adjust, monitor and troubleshoot a TecJet valve. Supports TecJet 110, TecJet 50 Plus, TecJet 85, TecJet 52, TecJet 37 and TecJet HP (high pressure) valve. The service tool runs on a personal computer and communicates with the TecJet through a serial connection.This version handles firmware revisions:
- 5418-9517 -
- 5418-9516 -
- 5418-1232 NEW thru J (TecJet 110, 85 and 50+)
- 5418-2667 B thru E (TecJet 52)
- 5418-3080 NEW thru B (TecJet 52)
- 5418-3799 NEW thru A (TecJet 52, J1939)
- 5418-6097 NEW (TecJet 110, 85 and 50+, J1939)
- 5418-6465 NEW (TecJet HP)
- 5418-6534 NEW (TecJet 110, 85 and 50+)
- 5418-6535 NEW (TecJet 110, 85 and 50+, J1939)
- 5418-6931 NEW
- 5418-6943 NEW thru B (TecJet HP)
- 5418-7371 -
- 5418-7750 -
- 5418-1232 NEW thru J (TecJet 110, 85 and 50+)
- 5418-2667 B thru E (TecJet 52)
- 5418-3080 NEW thru B (TecJet 52)
- 5418-3799 NEW thru A (TecJet 52, J1939)
- 5418-6097 NEW (TecJet 110, 85 and 50+, J1939)
- 5418-6465 NEW (TecJet HP)
- 5418-6534 NEW (TecJet 110, 85 and 50+)
- 5418-6535 NEW (TecJet 110, 85 and 50+, J1939)
- 5418-6931 NEW
- 5418-6943 NEW thru B (TecJet HP)
- 5418-7371 -
- 5418-7750 -
System Requirements:
- Microsoft Windows® 11, 10, 8.1, 7.
- JAVA JRE 7.0(1.7) or 8.0(1.8)
- 1 GHz or faster x86 or x64 processor
- 1GB of RAM
- Minimum 800 by 600 pixel screen with 256 colors
- Recommended screen resolution 1024 x 768 or higher
- PC or Laptop with Serial or USB port. If a USB port is used a USB to serial adaptor is required. The adaptor should be of good quality that fully complies with the RS232 standard.
- 9 pin-D straight through Serial Cable (not a null modem cable)
Installation Instructions:
- The first step in installing this software is to download the file from this page. This file is an installation program that will step you through the installation process.
- After downloading this file, run it and follow the instructions on the setup dialogs.
Download:
Item
Name
Version
Size
Download